Cypress Semiconductor CY8CNP102E Manuel d'utilisateur télécharger pdf (Page 5)

CE54939

August 9, 2011 Document No. 001-54939 Rev *C 5

Testing the Project

Use HyperTerminal (or any other terminal program) to test the project. Configure HyperTerminal as follows in Windows.

1. Connect the CY3210 board to the PC serial port using a serial port cable.

2. Start HyperTerminal using Start  All Programs  Accessories  Communication  HyperTerminal

3. Enter a Name for the connection, for example Example_UART and click OK.

Figure 5.Give a Name to the Connection

4. In the Connect To option, select the desired serial port (for example, COM2) from Connect using list and click OK.

Figure 6.Select the Serial Port

1 2 3 4 5 6 7 8 9

Pas de commentaire

Cypress Semiconductor CY8CNP102E Manuel d'utilisateur Page 5