Cypress Semiconductor CY8C24894 Manuel d'utilisateur Page 19

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 64
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 18
CY3240 USB-I2C Bridge Guide, Doc. # 001-66660 Rev.*B 19
Kit Operation
3.3 Connect Demonstration Board to Bridge
1. Connect the I2C slave demonstration board to the bridge, as shown in Figure 3-5.
Figure 3-5. Demonstration Board and Bridge Connection
2. Select +5 V as power supply to the board from the Bridge Control Panel and click on the Toggle
Power button. The LED (red) on the bridge board lights up, as shown.
Figure 3-6. LED (Red) on the Bridge Board
3. Click List; the bridge will find the I2C slave demonstration board at 0x00 address.
3.3.1 Run Demonstration Board Test
The demonstration board has a built-in temperature sensor and photo diode. The measurement
results of these are sent over I2C.
1. Open the Variable Setting dialog box from the Chart menu.
Vue de la page 18
1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 63 64

Commentaires sur ces manuels

Pas de commentaire