Cypress Semiconductor NoBL CY7C1472V33 Guide de l'utilisateur Page 7

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 57
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 6
ZestSC1 User Guide
CONFIDENTIAL Page 7 of 57
standoffs in a position where it cannot touch any other items such as chassis,
boards or cables.
7. Plug the USB cable into ZestSC1 and the host computer or USB hub. It does not
matter whether the host computer is switched on or off. The cable has different
connectors at each end to ensure it is plugged in the correct way round.
8. If the host computer is switched off then switch it on now.
9. The host computer will detect a new USB device and request the software driver.
10. Install the software driver – see section 6.2 Software.
6.2.1 Headers
The connectors and headers on the board are listed below. Their approximate positions
are shown in Figure 1.
Figure 1. Approximate Positions of Connectors and Headers
Pin numbers zig-zag along the two-row header as shown in Figure 2.
Figure 2. Zig-Zag Pin Numbering of Two-Row Header
J2
J6
J3
J1
J5
J7
J
4
12
4 3
Vue de la page 6
1 2 3 4 5 6 7 8 9 10 11 12 ... 56 57

Commentaires sur ces manuels

Pas de commentaire