Cypress Semiconductor Perform STK12C68 Instructions d'exploitation télécharger pdf (Page 35)

3-20 (E)

DFP-R3000

(4) Adjustment

Adjust RV1 of the SE-437 (S side) so that a pulse type

waveform is generated at A portion of the output

waveform.

The pulse type waveform appears when RV1 is rotated

fully in the clockwise direction and then in the coun-

terclockwise direction.

Adjustment

(5) After the adjustment has been completed, input the

command C0 from the PC keyboard, and then press

the Enter key.

2. P side adjustment

(1) Input the command C1 (press the “C” key and “1”

key) from the PC keyboard at the screen of the termi-

nal software started and then press the Enter key.

(2) Input the command m100 from the PC keyboard and

then press the Enter key.

(3) Shut off the light incident upon the CCD lens by using

a paper.

(4) Adjustment

Adjust RV1 of the SE-437 (P side) so that a pulse type

waveform is generated at A portion of the output

waveform.

The pulse type waveform appears when RV1 is rotated

fully in the clockwise direction and then in the coun-

terclockwise direction.

3-3. CCD Bias Adjustment (SE-437 board Adjustment)

Optics block

Lens

Paper

SE-437 board (S side)

RV1

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 110 111

Pas de commentaire

Cypress Semiconductor Perform STK12C68 Instructions d'exploitation Page 35